Direct Drive Pump 2.1 GPM 120 Volt

////Direct Drive Pump 2.1 GPM 120 Volt

Direct Drive Pump 2.1 GPM 120 Volt

$1,385.00

· 1000 PSI Pump Capacity:
 50-100 .008 Misting Nozzles
 37-75 .012 Misting Nozzles
 32-65 .014 Misting Nozzles
· 120 Volt 60Hz 15 Amps
· 1.5 HP Motor 1725 RPM

Instruction Manual

Benefits of LP Switch: 
The low pressure switch protects your 1000 psi pump from damage if the water supply is accidentally turned off.  The switch prevents the pump from turning on which saves the pump from over-heating and damaging the internal seals.

Description

Weight and Dimensions: 75 lbs; L 24″ W 15″ H 13″ ·
Features: TEFC Electric Motor, 5 Micron Filter, Glycerin Filled Pressure Gauge, Drain Valve, Adjustable Regulator, Solenoid, triplex plunger design provides a smooth liquid flow,

Specification Sheet

Data Sheet

COMMON SPECIFICATIONS OF PUMP HEAD
Inlet Pressure Range. (Standard) Flooded to 75 psi (Flooded to 5.25 bar)
…………………………………… (Hi-Temp) 30 to 75 psi          (2.1 to 5.25 bar)
Bore…………………………………………….. 0.708”                    (18 mm)
Max. Liquid Temperature.(Standard) 160°F                 (71°C)
…………………………………… (Hi-Temp) 190°F                    (88°C)
Above 130°F call us for inlet conditions and elastomer recommendations.
Crankcase Capacity…………………… 11.15 oz. 
Inlet Ports (1)……………………………… 3/8” NPTF 
Discharge Ports (2)……………………. 3/8” NPTF 
By-Pass Ports (1)………………………… 1/4” NPTF 

Optional Add-ons:

Dual filter with 1 micron filter element.  This filter will stop smaller particles in the water and help prevent the nozzles from clogging.

The low pressure switch prevents the pump from turning on when the water supply is inadvertently shut off.  This prevents damage to the pump. 

Additional information

Weight 75 lbs
Dimensions 75 in

You may also like…